Event

Working Platform Design and Verification

12.00pm — 2.00pm, 27 July - 10 August 2022

Overview

An Engineering Education Australia Virtual Workshop:

About this course

Temporary working platforms for cranes and piling rigs are high-risk for those using them as well as those designing them. Many elements must be considered during design and construction phases.

Appropriate load input parameters need to be carefully selected to obtain the correct load cases. And robust and reliable design methods (including geotechnical parameters selection) need to be applied to assess the required thickness and stiffness of the working platform.

This course shares industry best practice methods for design and verification, covering both theory and practical application.

You’ll learn about:

  • the FPS method to assess the critical track pressures applied by piling rigs;
  • two common guidelines for the design of temporary working platforms (BRE470 and TFW2019);
  • the applicability of the different design methods for various ground conditions;
  • the underlying design assumptions about load transfer from piling rigs and cranes; as well as
  • the consideration of static and/or dynamic load factors in the different design approaches are briefly introduced.
  • Course facilitator and civil engineer with over 20 years’ international experience, Dr Martin Larisch will also discuss the most suitable soil investigation techniques to use for subsurface investigation works and the potential verification methods for platform verification/ certification.

To demonstrate the practical application of these concepts, the course will also include will include real world examples to expose some of the limitations and related risks.

The course will be delivered in two x two-hour sessions on 27 July and 10 August 2022, 12:00 pm - 2:00 pm AEST.

Learning outcomes

  • Different load cases which need to be considered for the assessment of plant loading and track bearing pressures
  • Principles of working platform design and the fundamental differences between the BRE470 and TFW2019 methods
  • Effects of ground water on the different design methods
  • Soil suitable site investigation methods to assess the subgrade conditions and their advantages and limitations
  • Common verification methods to assess and verify the construction of working platforms

 

Is this course for you?

This course is suitable for experienced temporary works and geotechnical engineers looking for a refresher; or as an introduction to working platform designs and verification for participants with limited or no experience in this area. Roles include:

  • Geotechnical engineers
  • Civil engineers
  • Structural engineers
  • Temporary works designers
  • Site managers
  • Project engineers
  • Project managers
  • Construction managers; and
  • Professionals from piling and crane companies

 

Engineering Education Australia's Virtual Workshops

A Virtual Workshop is a structured live online classroom-style delivery method for training and professional development. For the optimal online learning experience, Virtual Workshops are interactive and use tools such as break-out rooms for discussions, activities based on practical case studies, and two-way communication.

Details

Pricing
Members: $$350
Non-member: $$411.76
Key speaker
Dr Martin Larisch
Host(s)
Engineering Education Australia
Registration close
25 July 2022
11.59pm AEST